Ericsson Redback Networks SmartEdge 1200 - Page 175

Index 3
versions supported, 1-7
Craft console cable
pin assignments, A-2
purpose, 4-28
specifications, A-1
CRIT LEDs, 5-4
CWDM specifications
GE1020 cards, 2-13
GE3 cards, 2-12
D
DWDM specifications
GE1020 cards, 2-13
GE3 cards, 2-12
E
earthquake, compliance against, 3-6
electrical
power source requirements, 3-12
specifications, 3-3
environmental specifications, 3-5
ESD (electrostatic discharge) convenience jacks,
locations, 4-4
Ethernet cards (any version)
equipment LEDs, 5-9
LEDs illustrated, 5-9
Ethernet crossover cable, management port
pin assignments, A-2
purpose, 4-27
specifications, A-1
Ethernet management port
crossover cable, pin assignments, A-2
during normal operations, 3-13
straight cable, pin assignments, A-3
Ethernet straight cable, management port
pin assignments, A-3
purpose, 4-27
specifications, A-1
extended mount, 3-10
external timing
cables
connecting, 4-34
pin assignments, A-4
purpose, 4-29
specifications, A-3
described, 1-10
protection, 1-4
EXT TIMING LOS LEDs, controller cards, 5-6
EXT TIMING LOS PRI, LED is lit, 5-31
EXT TIMING LOS SEC, LED is lit, 5-31
F
FAIL LEDs
ATM cards, 5-7
controller cards, 5-5
Ethernet cards, 5-9
Gigabit Ethernet cards, 5-9
OC-192c/STM-64c cards, 5-12
FAN LEDs
described, 5-4
LED is lit, 5-30
fan tray
LEDs illustrated, 5-2
replacement restrictions, 6-20
replacing, 6-20
Fast Ethernet-Gigabit Ethernet (FE-GE) cards
10/100 facility LEDs, 5-10
100/1000 facility LEDs, 5-10
cable specifications, A-5
equipment LEDs, 5-9
specifications, 2-8
file storage, 1-10
flush mount, 3-10
fuses
and troubleshooting, 5-30
minimum size required, 3-5
powering on the system, 5-2
G
GBIC (gigabit interface converter) transceivers
inserting, 6-6
removing, 6-6
Gigabit Ethernet cards (any version)
equipment LEDs, 5-9
LEDs illustrated, 5-9
Gigabit Ethernet cards (transceiver-based)
10GE specifications, 2-14
cable specifications, A-8
facility LEDs, 5-11
GE
first version specifications, 2-10
second version specifications, 2-10
GE1020
CWDM specifications, 2-13
DWDM specifications, 2-13
slot restriction, 1-13
specifications, 2-13
GE3
CWDM specifications, 2-12
DWDM specifications, 2-12
specifications, 2-11
transceiver types
described, 2-9
installing, 4-23
servicing, 6-5