4 SmartEdge 1200 Router Hardware Guide
H
hardware
LED behavior during ODD, 5-36
preparing traffic card for ODD, 5-34
returning traffic card to in-service, 5-35
humidity, operating range, 3-5
I
installing cards, slot restrictions, 6-17
L
LEDs
ACO LED, 5-4
alarm, 5-4
ATM OC-12c/STM-4c cards, 5-7
ATM OC-3c/STM-1c cards, 5-7
behavior during ODD, 5-36
controller cards, 5-5
CRIT LED, 5-4
Ethernet cards, 5-9
EXT TIMING LOS PRI, controller cards, 5-6
EXT TIMING LOS SEC, controller cards, 5-6
facility LEDs, controller cards, 5-6
FAN LED, 5-3
Gigabit Ethernet cards, 5-9
MAJ LED, 5-4
MIN LED, 5-4
OC-192c/STM-64c cards, 5-11
PWR A1 LED, 5-3
PWR A2 LED, 5-3
PWR B1 LED, 5-3
PWR B2 LED, 5-3
STDBY LED
ATM cards, 5-7
controller cards, 5-5
OC-192c/STM-64c cards, 5-12
SYNC LED, controller cards, 5-6
testing, 5-30
LINK/ACTIVITY LEDs, XCRP, XCRP3 controller
cards, 5-6
LINK/ACT LEDs, XCRP4 controller cards, 5-6
LINK LEDs, ATM cards, 5-8
LNK ACT LEDs, FE-GE cards, 100/1000 ports, 5-10
LNK LEDs
10/100 Ethernet cards, 5-10
transceiver-based Gigabit Ethernet cards, 5-11
local console
cable specification, A-2
connecting cables, 4-31
equipment requirements, 3-14
uses, 4-28
LOC LEDs, ATM cards, 5-8
LOS LEDs
LED is lit, 5-31
OC-192c/STM-64c cards, 5-12
M
MAJ LED is lit, 5-30
MAJ LEDs, 5-4
management access
during normal operations, 3-13
during startup and reload operations, 3-13
equipment requirements, 3-14
ports for, 1-11
management port
description, 3-13
during reload operations, 3-13
label for, 3-13
management workstation
cable specifications
local connection, A-2
remote connection, A-3
equipment requirements, 3-14
types of connections, 3-13
uses, 4-27
memory, controller cards, 1-9
MIN LEDs, 5-4
mounting brackets
chassis positions
installing, 4-6
planning for, 3-10
installing, 4-7
torque required, 4-7
mounting restrictions, chassis, 3-10
N
normal operations
management access requirements, 3-14
types of management access, 3-13
NTP (Network Time Protocol) server, synchronizing
with, 1-9
NVRAM (nonvolatile RAM), 1-9
O
OC-192c/STM-64c cards
cable specifications, A-9
equipment LEDs, 5-12
facility LEDs, 5-12
LEDs illustrated, 5-11
specifications, 2-16
ODD (on-demand diagnostic)
clearing results, 5-37
commands to test a component, 5-35
controller cards supported, 5-32
displaying results, 5-36
examples, 5-38
To Next Page
Loading...
