bt07d109
-- 7 8 --
cdte1de2
Maintenance
Note:
All warranty undertakings given by the supplier cease to apply if the customer attempts
to rectify any faults on the machine during the warranty period.
Check--up and cleaning
Clean the welding power source once a year using dry
compressed air (reduced pressure). The dust filter is to
be checked up and cleaned regularly.
If the welding power source is used in a dusty and dirty
environment, the cleaning should be performed more
frequently.
For maximal service reliability it could be advisable
to let an authorised retailer service the machine once
ayear.
SPARE PARTS
The spare parts lists are published in separate documents.
Product filename / ordering no.
DTE 200 0458 234 990
DTE 255 0457 784 990
To Next Page
Loading...
