ESI A64v - Tone Settings for Call Events

Page 40 of 66 0455-0323 Rev A
Restrict Active URI Source
IP
Set the device to accept Active URI command from a specific IP
address.
Push XML Server
Configure Push XML Server. When phone receives a request, it will
determine whether to display corresponding content on the phone.
Line Display Format
Line display format including SIPn/SIPn：xxx/xxx@SIPn
Call Number Filter
Configure a special character & , if the number is 78 & 9. The call will
filter out &
Auto Resume Current
If the current path changes, the hold will automatically resume
Limit Talking Duration
Automatically hang up the call after enabling the time set for the call
Talking Duration
Call duration ,20-600s
No Answer Auto HangUp
Timeout
If the call is not answered, the call will be automatically hung up after
the timeout
Enable Push XML Auth
To enable push xml auth, user password is required
Ringing timeout
If the call is not answered, automatic hang-up after timeout
Show description
information
Device description
Tone Settings
Enable Holding Tone
When enabled, a tone plays when the call is held
Enable Call Waiting Tone
When enabled, a tone plays when call waiting
Play Dialing DTMF Tone
Play DTMF tone on the device when user presses a phone digit while
dialing, default enabled.
Play Talking DTMF Tone
Play DTMF tone on the device when user presses a phone digits
during taking, default enabled.
Auto-answer beep
When enabled, a beep will be heard when auto-answer is activated.
Tone of open door
successfully
Closed: No prompt tone is played after the door is opened
successfully
Default: Use the default prompt tone
Voice: built-in voice prompt by default, default is "door open
successfully"
Support for custom door opening success prompt tone, which can be
customized in system > upgrade > ringtone or after the door is
opened and the ringtone file upgrades successfully
Tone of open door
unsuccessfully
Closed: There is no prompt tone after the door fails to open
Default: Use the default prompt tone
Voice: voice prompt by default, default is "failed to open the door"
Supports custom door opening failure prompt tone, in the system >
upgrade > ringtone, or after failing to open the door and the ringtone
file upgrades unsuccessfully
Door closing beep
Close: no beep after closing the door.
Voice: default built-
in voice prompt, default is "Close" Support custom
door closing tone, in the system > upgrade > ringtones, after
upgrading the ringtone file under the door closing
available settings to
use the custom tone
Successful card addition
beep
Close: No beep after successful card addition.
Voice: default built-in voice prompt, default is "Card added
successfully"
Support customizable beep for successful card addition in system >
upgrade > ringtones, after upgrading the ringtone file available under
successful card addition settings to use a custom tone.