EasyManua.ls Logo

ESI A64v - Intercom and Response Code Settings

ESI A64v
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 41 of 66 0455-0323 Rev A
Add card failure beep
Close: No beep after failed card addition.
Voice: default built-in voice prompt, default is "card refill failed".
Support customizable sound for card failure in system > upgrade >
ringtones. After upgrading the ringtone file under the card failure, set
to use a custom prompt
Successful beep for card
deletion
Close: No beep after successful card deletion.
Voice: default voice prompt is "card deletion successful"
Support for customizing the successful card deletion tone. Go to
System > Upgrade > Ringtone. After upgrading
the ringtone file under
the successful card deletion you can set to use the custom prompt.
Card deletion failure beep
Close: No beep after failed card deletion.
Voice: default voice prompt is "card deletion failed".
Support for customizing the card deletion failure tone in System >
Upgrade > Ringtone. After upgrading the ringtone file under the card
deletion failure, it can be set to use a custom prompt.
Magnetic door detection
beep
Closed: No beep after door magnetic detection anomaly.
Voice: default voice prompt is "Please close the door".
Customized door detection tones are available under System >
Upgrade > Ringtones. After upgrading the ringtone file the door
detection can be set to use the customized prompt.
Intercom Settings
Enable Intercom
When intercom is enabled, the device will accept the incoming call
request with a SIP header of Alert-Info instruction to automatically
answer the call after specific delay.
Enable Intercom Mute
Enable mute mode during the intercom call
Enable Intercom Tone
If the incoming call is intercom call, the phone plays the intercom
tone
Enable Intercom Barge
Enable Intercom Barge by selecting it, the phone auto answers the
intercom call during a call. If the current call is intercom call, the
phone will reject the second intercom call
Response Code Settings
Busy Response Code
Set the SIP response code on line busy
Reject Response Code
Set the SIP response code on call rejection

Table of Contents

Related product manuals