ESI A64v - Page 52

Page 52 of 66 0455-0323 Rev A
Dialer
None
：
Nothing happens when you press the speed dial Dsskey1
：
When it is set to dsskey1, follow the settings of dsskey1 to make call,
answer, etc.
Dsskey2 ： When it is set to dsskey2, perform operations such as
calling and answering according to the setting of dsskey2
Ringing
Answer
：
Set to answer, when there is an incoming call, if auto answer
is disabled, press the speed dial key to answer the call.
End: set to end, when there is an incoming call, press the speed dial
button to hang up the call.
Talking
End: set to end, when there is a call, press the speed dial key to hang
up the call.
Volume up: set as volume up button. When there is a call, press the
speed dial button to increase the volume.
Volume down: set as volume up button. When there is a call, press the
speed dial button to decrease the volume.
Dsskey1：When it is set to dsskey1, follow the settings of dsskey1 to
make call, answer, etc.
Dsskey2 ： When it is set to dsskey2, perform operations such as
calling and answering according to the setting of dsskey2
Desktop Long
Pressed
None: Long press the speed dial key. It does not respond.
Main menu: Long press the speed dial key to enter the command line
mode.
Advanced Settings
Hot Key Dial Mode
Select
Number 1 call number 2 mode selection.
<Main/Secondary>: If the first number is not answered within the set
time, the second number will be automatically switched.
<Day/Night>：The system time is automatically detected during the
call. If it is daytime, the first number is called, otherwise the second
number is called.
Call Switched
Time
Set number 1 to call number 2 time, default 16 seconds
Day Start Time
The start time of the day when the <Day/Night> mode is defined.
Default "06:00"
Day End Time
The end time of the day when the <Day/Night> mode is defined.
Default "18:00