System Basics 39
Patch
Setup
Browser
Magic Sheet
Workspace
Command History
Curves
Pixel Maps
Show Control
Mirror
Any of these softkeys will open the associated display with a single press.
Closing Displays
To close any tab display, select the display by using the [Tab] key or other means of navigation. When
the desired display is active, press [Escape] to close it.
To close a display in the CIA, press the [Displays] key and the browser will reappear.
To close all displays except for the live/blind display and the playback status display (tabs 1 and 2),
press [Shift] & [Tab].
You can also close tabs by using the Tab Tools. See Tab Tools (on page37)for more information.
Home Screen
Upon start up or creation of a new show file, any connected monitor that is not already displaying
the Live (Tab 1) or Playback Status Displays (Tab 2) will show the Display Management Home Screen.
This screen consists of four general areas, each offering different display-related options:
Layout Options
These tools offer you greater flexibility in the number of tabs you can view in any given workspace. A
workspace can have up to four frames. Selecting a layout icon will assign the frame layout identified
To Next Page
Loading...
