Once you have selected a specic tag category, you will be presented with a menu of specic tags
within that category. Use the cursor and enter keys to select a specic tag. It will be added to the
current tag list and be shown above the tag list.
Note that you can select as many tags at once as you like. As you add tags, the main list of FX chains
will be ltered to only show presets that correspond to the tag(s) you have selected.
Many of the algorithms on the H9000 will carry multiple tags. For example, Blackhole will fall under
the tags of Product Type H9 as well as Eect Type Reverb. In this way, you can reach the same
algorithm in several dierent ways.
This powerful feature is a great way to narrow down the H9000’s vast list of FX chains to a more
manageable selection that is appropriate to the task at hand.
4.4.3.5.5. Clear
Press the Clear sot key to clear all currently loaded tags and return the main list of FX chains to its
untagged state.
4.4.3.6. Mix
Press the latching Mix sot key to adjust the mix levels of the FX chains present in the currently
loaded session.
The display will switch to the Mix screen, showing level controls for each FX chain. Use the cursor
keys to navigate to the FX chain for which you wish to adjust the level, then use the wheel to adjust
its mix level.
4. Front Panel Operation
Copyright © 2021, Eventide Inc.
To Next Page
Loading...
