Eventide H9000 - Page 80

Move the external control that you wish to pair to the highlighted parameter.
The external controller and the parameter are now paired.
4.6.1.2. Custom Map
The Custom Map feature is also designed to map controllers to H9000 parameters, but with a much
ner level of control. It works as follows:
Use the cursor keys to navigate to the parameter you wish to custom map a controller to, then
press the Custom Map sot key.
The “Controller Type” pop-up menu will appear, where you can select from the following types of
controllers you wish to map:
O
Expression Pedal 1-4
Switch 1-6
Note On
Poly Pressure
MIDI CC (Continuous Controller) Single
MIDI CC (Continuous Controller) Double
MIDI Program Change
Channel Pressure
Pitch Wheel
MIDI Start
MIDI Stop
Function 1-8
Navigate to the controller type you wish to use then press the Enter key.
•
•
•
•
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
•
4. Front Panel Operation
79
Copyright © 2021, Eventide Inc.