153
FUEL SYSTEM
FUEL COMPONENT SERVICING
7
Connect throttle linkage and throttle position sen-
sor connector.
IMPORTANT: DO NOT lubricate TPS to throttle
shaft surface.
Install oil/fuel pump bracket. Tighten screws 30 to
42 in. lbs. (3.5 to 4.7 N·m).
Position clamps as shown.
Refer to TPS CALIBRATION on p. 113.
1. Throttle linkage
2. TPS electrical connector
3. Vapor separator vent hose
4. Oil recirculation hose
004248
1. Clamps
2. Idle air hose
3. Oil/fuel pump bracket
006990
To Next Page
Loading...
