Evolis PRIMACY 2 User Manual

36
PRIMACY 2
Installation of the lamination module
!

1
Place the printer on the installation platform
("Printer" side)
2
Connect the printer power supply and
USB cable. See “Connecting the Printer
Power Supply Cable”, page 11 and See
“Installing”, page 12
3
Connect the lamination module power
supply cable.
4
Place the lamination module on the
installation platform ("Laminator" side)
5
Make sure that infra-red connectors are
facing each other and the two modules are
aligned.

Evolis PRIMACY 2 Specifications

General

Resolution	300 dpi
Card Format	ISO CR80 - ISO 7810 (53.98 mm x 85.60 mm)
Print Technology	Dye-sublimation
Card Capacity	100 cards (0.76 mm - 30 mil)
Card Feeding	Automatic
Card Thickness	0.25 to 1.25 mm (10 to 50 mil)
Card Types	PVC cards, Composite PVC cards, PET cards
Connectivity	USB, Ethernet
Encoding Options	Magnetic stripe encoder, Smart card contact station, Contactless card encoder
Operating Systems Supported	Windows, Mac OS, Linux
Dimensions	247 mm (H) x 205 mm (W) x 381 mm (D)
Weight	4.02 kg
Print Speed	Up to 280 cards/hour (YMCKO)