70
PRIMACY 2
Interrupting the transfer between computer and printer during the download phase (powering off the printer or computer,
unplugging a cable) would make it impossible to restart the printer. If such an incident occurs, contact your Evolis dealer to replace
the printer’s processing board.
On Windows
1
myplace.evolis.com.
2
Open Evolis Premium Suite and double-click on the name of the printer. Go to Assistance and Maintenance>Software updates>Printer
firmware>Start the updates wizard.
3
.firm that was just downloaded.
4
5
If the printer is not showing a Ready status, this means that the update was not performed correctly or, that the printer is not working properly.
Check the connection cables and run a new update.
On Macintosh
1
myplace.evolis.com.
2
Go to Menus & preferences, Printers and scanners, and select your printer. Go to Options & supplies, Utility and click Open printer utility. The
Evolis Card Printer window opens. All you need to do now is click on Upgrade.
3
4
progress.
5
6
Identify.
7
If the printer is not showing a Ready status, this means that the update was not performed correctly or, that the printer is not working properly.
Check the connection cables and run a new update.
NOTE
To Next Page
Loading...
