7
PRIMACY 2
1. GETTING STARTED
UNPACKING
Your printer is supplied with several accessories that we ask you to look at closely.
This list may vary depending on your location.
The printer is shipped in special packaging designed to prevent any damage in transit. If you notice any visible damage, do not hesitate to contact the
shipper and immediately inform your Evolis dealer, who will tell you the procedure to follow.
Evolis takes great care over the quality of its packaging and we ask that you keep this packaging somewhere clean and dry.
The full original packaging (outer box, inner wedges and protective bags) is required in the event that the printer is returned. If the
by the warranty. You will be charged for new packaging for shipping the printer back to you.
Accessories supplied with your printer:
• Power supply unit – FSP type FSP060-RAAK3
• Mains power cable
• USB cable
• Reject box/Rear output hopper
• Starter cleaning kit
• Quick installation guide with QR code to access the driver
• Card designing software Cardpresso
!
If any of these components are missing, please contact your Evolis dealer.
Use only the power supply unit supplied with your Evolis printer.
Use only the USB cable supplied with your Evolis printer.
NOTE
The Evolis printer must be placed in a dry location, protected from dust and drafts but well-ventilated. Make sure to keep your printer
To Next Page
Loading...
