Evolis PRIMACY 2 - Print Head Cleaning

57
PRIMACY 2
Print head cleaning
NOTE
Recommended cleaning cycle: every 5 regular cleaning cycles.
Servicing accessory: cleaning pen
!
Unplug the printer from its power supply before cleaning the print head.
Follow the cleaning cycles carefully.
Avoid any contact between the print head and any metal or sharp objects. It could damage the print head.

1
Remove the cap of the
cleaning pen.
2

print head.
3
Pull the protective cover
up and gently rub the
pen from left to right
along the print head for
a few seconds.
4
Close the cover.
Reconnect the printer.
NOTE
Wait for 2 minutes after cleaning before using your printer.