How to Insert an Audio Delay or Advance from the Remote Panel
To delay or advance the beginning of the audio transition effect of a playlist element,
1. Load the playlist by pressing .
See also section "Loading a Playlist" on page 218.
2. Browse to the playlist element: .
The Playlist Edit mode is enabled.
See also section "Browsing a Playlist" on page 222.
3. Enter the Edit Audio mode by pressing + .
The Edit Audio key display is highlighted and the Audio Delay function (A.Delay) and the Audio
Advance function (A.Advanc) become available.
4. To enter
◦ the Audio Delay mode, press .
The A. Delay key display is highlighted .
◦ the Audio Advance mode, press .
The A. Advanc key display is highlighted .
USER MANUAL
LSM-VIA |7. Working with Playlists| 203
To Next Page
Loading...