How to Connect to a Server from the Viewer
1. Click the Server field
or
press F9 on the keyboard .
The Servers screen is displayed:
The server currently selected is displayed as a blue box. The local server is shown as a gray box
when it is not selected.
2. Select a server:
◦ click
or
◦ press , then
To close the Servers screen without selecting a server, do one of the following actions:
• press X in the top right corner
• press
• press + to go back to the local server.
LSM-VIA is connected to the selected server.
230| January 2022 | Issue 1.4.G
To Next Page
Loading...