When a clip angle is selected, colored handles are added on each side of the clip position, whether the
clip is loaded or not. The selection is blue for local clips and purple for remote clips. If the clip is not
loaded, the whole clip position is colored as well. If it is loaded, the clip position will be colored as
mentioned in section "Clip Grid (3)" on page 66.
Color Meaning
Local clip selected, and not loaded.
Remote clip selected, and not loaded.
If you select clip(s) from the Clip grid, or a playlist from the Playlist grid, after playlist elements
have been selected from the Playlist pane, the latter are automatically deselected, and vice-
versa.
How to Select Clip Angles (CAMMode)
To select in CAMmode
a single angle • click the CAMangle in the Clip grid
OR
• press the arrow keys on your keyboard.
some angles from different clips
press + click all the CAM angles you want
all existing angles between two
angles
press + click the first CAM angle, then the last CAM
angle
If you then switch to Clip mode, all the angles from the selected clips become selected.
USER MANUAL
LSM-VIA |6. Working with Clips| 81
To Next Page
Loading...
Need help?
General