How to Select Clips (Clip Mode)
To select in Clipmode
a single clip (all its angles) • click one of the clipangles in the Clip grid
OR
• press the arrow keys on your keyboard.
all the angles from different clips
press + click the clips you want
all existing clips between two clips
press + click the first clip, then the last clip
If you then switch to CAMmode, all the angles from the selected clips remain selected.
With SHIFT + click, it is not possible to select content on more than two pages. Only content
selected on pages of first and last selection will be effectively selected.
For example, selecting clips from pages 2 to 8 will not select clips on pages 3 to 7 but only clips
on pages 2 and 8.
Selecting Clips from the LSM-VIAViewer Search Window
Introduction
One or several clip angles can be selected from the LSM-VIAViewer Search window.
In case of multiselection, the number of selected clips is displayed at the bottom of the LSM-VIAViewer
screen:
82| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General