S2000 Elite - User's Guide
035-00707 Revision 1
49
Screen Lock PIN
Selecting this will immediately ask the user to input a PIN that will be used to lock/unlock the
unit from the RUN screen. The default PIN is 1234
Load Save
Selecting this will present the user with the screen to load and save configurations, firmware,
and system configuration.
Local Select - if file is to be loaded
from or saved to the unit.
SD Card Select - if file is to be
loaded from or saved to the
external SD card
Firmware Update - Select if
loading/upgrading the firmware
System Config - Select if
loading/saving a system
configuration
Cure Profiles - Select if
loading/saving a cure profile
Load - Select load to see list of
compatible files
Save - Select save to save/rename
a new or existing file
Delete - Select to remove a file
Only the following settings are saved when the system configuration is saved:
• Lamp Intensity (%)
• Lamp Calibrated Intensity
• Lamp Care Duration (h)
• Alarm Volume (%)
• Screen Brightness (%)
To Next Page
Loading...
Need help?
General