S2000 Elite - User's Guide
035-00707 Revision 1
51
Calibration
Selecting this will present the user with the ability to calibrate the unit with a Radiometer. The
user will be presented with this screen whenever any calibration effort is made using the
R2000 from any point of the unit operation.
StepCure
StepCure screen allows users to program custom exposure profiles to accommodate different
applications. These profiles can be saved and loaded across other units for simultaneous
operations.
Return - Navigates back to previous
screen
New - Clears existing StepCure
design and starts a new one
Undo - Removes the last change
made in the profile (not available in
touch-screen)
Set - Apply the current profile to use
for operation
Clear - Clears the profile from
operation. Profile design will remain
Load - Loads an external profile
from local or SD card
To Next Page
Loading...
Need help?
General