Excelitas Technologies OmniCure S2000 Elite

S2000 Elite - User's Guide
035-00707 Revision 1
55
System Settings – Selecting this will present user with the system settings screen, where the
user will be able to configure settings on how the system will be used. The layout of the
window is different than that of the touch-screen interface. Despite the differences, the
available options are still the same between the two interfaces.
1 – Run Screen -
Settings regarding
what items to display
on the Run screen
2 – Screen Volume -
Settings regarding
the alarm volume
and screen
brightness
3 – Date and Time -
Settings regarding
date and time
reference for the
system
4 – Advanced Setup
- Settings regarding
the optional features
of S2000 Elite
Network settings allow the S2000 Elite to communicate over an Ethernet network. Addresses
can be configured by DHCP or Manual. When set to DHCP, only the Host Name can be
configured. Once changes have been made, select Set on the top to save and apply the
settings.
Changing the network settings using the web-interface may cause loss of
connectivity.