Managing Data
FTB-1v2 and FTB-1v2 Pro 157
Transferring Data via the Bluetooth Technology
1d. On the FTB-1v2 running Windows 10 or FTB-1v2 Pro, tap Pair. On
the FTB-1v2 running Windows Embedded 8 Standard, the
application tries to establish the pairing automatically.
Note: If the computer or device that you want to select is already paired, you must
remove the pairing first with the Remove device button. On the FTB-1v2
running Windows Embedded 8 Standard, you must first tap the button
to view the Remove device button.
Note: Depending on the computer that you are using, the application will either
provide you with a passkey, or prompt you to confirm that the displayed
passkey matches the passkey used on the computer.
1e. If necessary, write down the provided passkey.
1f. On the computer, when the application prompts you, follow the
on-screen instructions. Enter the passkey that you wrote down
earlier, or confirm the correspondence between the two
passkeys.
2. Transfer the files as follows.
2a. From the main window, tap the Utilities button.
2b. Tap Bluetooth File Transfer.
To Next Page
Loading...
Need help?
General
