Troubleshooting
FTB-1v2 and FTB-1v2 Pro 331
Restoring Your Unit to Normal Operation
Windows Embedded 8 Standard and Windows 8.1
Pro
When you want to restore your unit, there are several options. The table
below gives an overview of the possibilities.
Method Description
Refresh  The unit will be reverted to its initial state.
 All data files that were saved to the default
personal folders (Documents, Pictures, etc.) will
still be available once the operation is complete.
 If you have installed products and updates since
you purchased your unit, you will have to reinstall
them.
 Refer to Microsoft documentation for more
information.
Reset
 The unit will be reverted to its initial state.
 All data files will be lost once the operation is
complete.
 If you have installed products and updates since
you purchased your unit, you will have to reinstall
them.
 Refer to Microsoft documentation for more
information.
Restore
 The unit will be reverted to the state in which it
was when the WIM file was created.
 All data files will be lost once the operation is
complete.
 If you have installed products and updates since
the WIM file was created, you will have to
reinstall them.