To Next PageTo Next Page
Need help?Do you have a question about the Extreme Networks BlackDiamond 8810 and is the answer not in the manual?
General| Model | BlackDiamond 8810 |
|---|---|
| Product Series | BlackDiamond |
| Product Type | Switch |
| Switch Type | Modular |
| Jumbo Frame Support | Yes |
| Throughput | 952 Mpps |
| Power Supply | Hot-swappable |
| Management | CLI, Web, SNMP |
| Dimensions | 10.5 x 17.3 x 22 inches |
Defines the target audience and required knowledge for this guide.
Explains notice icons and text formatting conventions used in the documentation.
Lists related documentation for Extreme Networks switches and software.
Provides a general introduction to the BlackDiamond 8800 series switches and their features.
Explains the full-duplex capability of the switch ports and its benefits.
Details the function and connection of the management port on the MSM.
Describes the compact flash slot for storage and diagnostic functions on the MSM.
Details the physical features, slots, and capabilities of the 8806 chassis model.
Details the physical features, slots, and capabilities of the 8810 chassis model.
Introduces the types of modules (MSM and I/O) available for the BlackDiamond 8800 series.
Describes the function, types, and activity of Management Switch Modules (MSMs).
Explains the LED indicators and their meanings for various MSM models.
Provides an overview of the different series and types of I/O modules available.
Details the 8500 series I/O modules, including port types and features.
Describes the original series I/O modules like G24X and 10G4X.
Details the a-series I/O modules and their software requirements.
Describes the c-series I/O modules and their software compatibility.
Details the e-series I/O modules, including G48Te, G48Pe, G48Te2.
Describes the 8900 series I/O modules and their compatibility.
Explains the LED activity for I/O modules and port LEDs.
Introduces the AC and DC power supply options for the switches.
Details the 700/1200 W AC power supply unit, its features, and specifications.
Explains the status LEDs for the 700/1200 W AC power supply.
Details the 600/900 W AC power supply unit, its features, and specifications.
Discusses compatibility and considerations when mixing AC power supply models.
Details the 1200 W DC power supply unit, its features, and specifications.
Explains the status LEDs for the 1200 W DC power supply.
Outlines the key aspects of planning a suitable installation site for the equipment.
Covers essential site requirements including environmental and code compliance.
Details environmental factors like temperature, humidity, and cleanliness for optimal operation.
Emphasizes compliance with local building and electrical codes for installation.
Provides recommendations for setting up a suitable wiring closet environment.
Specifies recommended temperature ranges for system operation and storage.
Defines the acceptable operating humidity levels for equipment longevity.
Outlines guidelines for spacing multiple chassis to ensure proper airflow and prevent overheating.
Specifies clearance and airflow recommendations for chassis installation.
Details measures to protect equipment from ESD damage during installation.
Provides guidelines for selecting and preparing equipment racks.
Explains how to properly ground equipment racks for safety and performance.
Specifies the necessary clearance space around racks for servicing.
Details methods for securely attaching equipment racks to the floor.
Guides on selecting and installing appropriate cabling for network equipment.
Recommends industry standards like BICSI for site planning and cabling.
Highlights the importance of reliable cable labeling and record management.
Provides information on choosing suitable cable media and understanding distances.
Recommends specific types of RJ-45 connector jackets for proper port fit.
Details specific cable types and part numbers for the 8900-G96T-c module.
Offers recommendations for the proper installation and routing of network cables.
Provides guidance on handling fiber optic cables, including bend radius.
Explains how to avoid RF interference and suggests mitigation strategies.
Covers power requirements including PoE devices and general supply guidelines.
Specifies connection requirements for Power over Ethernet devices.
Offers recommendations for planning power supply connections for network equipment.
Details requirements for AC power cords, including certification and suitability.
Explains the function and requirements of Uninterruptible Power Supplies (UPS).
Guides on calculating UPS volt-amperage requirements based on equipment load.
Specifies the required transition time for UPS units for optimal performance.
Lists relevant ANSI/TIA/EIA standards for cabling and grounding.
Provides step-by-step instructions for safely unpacking the BlackDiamond 8806 chassis.
Details the procedure for safely unpacking the BlackDiamond 8810 chassis.
Lists necessary tools and equipment for chassis installation.
Explains how to attach optional mid-mount brackets for specific rack installations.
Provides instructions for physically mounting the chassis into a standard equipment rack.
Details the steps for grounding the chassis for electrical safety.
Highlights safety precautions before installing power supply units.
Details compatible power supply units for different BlackDiamond switch models.
Addresses considerations for mixing AC power supply models in the same chassis.
Specifies the minimum ExtremeXOS software versions required for PSU recognition.
Provides requirements and selection guidance for AC power supply cords.
Guides on installing AC power supply units into the switch chassis.
Details the process for installing 1200 W DC power supply units.
Defines the specific slot locations for MSMs and I/O modules in different chassis.
Explains how to identify MSMs and I/O modules by their release latch colors.
Provides step-by-step instructions for installing modules into the switch chassis.
Guides on connecting network cables to the switch ports.
Describes the procedure for installing a second MSM for redundancy.
Explains how to verify correct module installation using LEDs and CLI commands.
Details the process for safely removing modules from the switch.
Covers the installation and removal of blank front panels to maintain airflow and EMI protection.
Describes how to manage external compact flash memory cards on the MSM.
Guides on establishing initial management access to the switch via console.
Provides instructions for installing the S-POE daughter card to add PoE functionality.
Details how to install option cards like S-G8Xc and S-10G1Xc into specific MSM models.
Describes the procedure for removing MSM option cards.
Explains how to install and remove AC power cord retainers on the 8810 switch.
Provides step-by-step instructions for installing the AC power cord retainer on the 8810 switch.
Details the process for disconnecting AC power cords from the 8810 switch.
Explains how to install and remove AC power cord retainers on the 8806 switch.
Details the process for removing the AC power cord retainer from the 8806 switch.
Lists the tools needed for installing PSU covers.
Provides instructions for installing and removing the PSU cover on the 8806 switch.
Details the steps to install the PSU cover kit on the 8806 switch.
Explains how to remove the PSU cover from the 8806 switch.
Provides instructions for installing and removing the PSU cover on the 8810 switch.
Explains how to remove the PSU cover from the 8810 switch.
Introduces the purpose of cable management accessories for the BlackDiamond switches.
Explains how to use cable holders and clips for organizing cables.
Provides instructions for connecting multiple cable holders together.
Details how to connect multiple cable clips to form a bundle.
Provides instructions for replacing the fan tray in the switch chassis.
Lists tools and equipment needed to replace the fan tray.
Details the steps for safely removing the fan tray from the chassis.
Guides on installing a new fan tray into the switch chassis.
Provides instructions for replacing the PSU/Fan Controller in the switch.
Details the process for removing the PSU/Fan Controller from the chassis.
Guides on installing a new PSU/Fan Controller into the switch chassis.
Highlights safety precautions for repacking the chassis.
Lists the tools and materials needed for repacking the chassis.
Provides instructions for repacking the BlackDiamond 8810 chassis for shipping.
Details the procedure for repacking the BlackDiamond 8806 chassis for shipping.
Emphasizes the importance of reading and following safety information.
Lists factors to consider before installing equipment for optimal performance and safety.
Provides safety recommendations for performing maintenance on Extreme Networks equipment.
Outlines general safety guidelines to follow during installation and operation.
Specifies requirements for routing cables within and between buildings for LAN systems.
Details safety and procedural guidelines for installing power supply units.
Provides guidance on selecting appropriate and certified power supply cords.
Covers safety procedures for battery replacement and disposal.
Highlights safety warnings related to optical modules and laser radiation.
Lists regulatory compliance standards for pluggable optical modules.
Provides detailed technical specifications for the BlackDiamond 8810 switch.
Lists detailed technical specifications for the BlackDiamond 8806 switch.
Details specifications (weight, power, dimensions) for various BlackDiamond 8000 series modules.
Lists technical specifications for AC and DC power supplies used with the switches.
Provides pinout diagrams for console connectors and other interfaces.
