BlackDiamond 8800 Series Switches Hardware Installation Guide
107
Figure 66: Locking Handle on the 1200 W DC Power Supply
2 Carefully slide the power supply all the way into the power supply bay (see Figure 67).
Be sure that the power supply is fully seated in the switch.
Do not slam the power supply into the chassis backplane. Use the locking handle to secure the power
supply in the power supply bay.
Figure 67: Installing the 1200 W DC Power Supply in the Power Supply Bay
3 Repeat steps 1 and 2 to install additional power supplies.
To Next Page
Loading...
