Extreme Networks Summit X430 Series - Page 448

Appendix B: Technical Specifications
Summit Family Switches Hardware Installation Guide
448
Summit X450e-24p Power
Operational voltage range 90 to 264 V
Nominal input ratings 100 to 240 V , 50/60 Hz, 5.25 A
Input current 4.25 A @ 115 V (low-line)
2.0 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Inrush current 30 A @ 115 V, 60 A @ 230 V
Power supply cord type AC
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to “Power Cord Requirements for AC-Powered Switches and
AC Power Supplies” on page 500.
Power supply cord gauge 18 AWG (0.75 mm
2
) up to 6 feet or 2 meters
or
16 AWG (1.0 mm
2
) over 6 feet
Efficiency 80% with 60% to 100% load
Heat dissipation with PoE full load 120 W (410 BTU/hr)
Power consumption with PoE full load 488 W (1,665 BTU/hr)
Heat dissipation without PoE 54 W (184 BTU/hr)
Power consumption without PoE 54 W (184 BTU/hr)
Summit X450e-48p Power
Operational voltage range 90 to 264 V
Nominal input ratings 100 to 240 V , 50/60 Hz, 6.0 A
Nominal input current 5.25 A @ 115 V (low-line)
2.5 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Inrush current 30 A @ 115 V, 60 A @ 230 V
Power supply cord type AC
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to “Power Cord Requirements for AC-Powered Switches and
AC Power Supplies” on page 500.
Power supply cord gauge 18 AWG (0.75 mm
2
) up to 6 feet or 2 meters
or
16 AWG (1.0 mm
2
) over 6 feet
Efficiency 80% with 60% to 100% load
Heat dissipation with PoE full load 180 W (614 BTU/hr)
Power consumption with PoE full load 507 W (1,730 BTU/hr)
Heat dissipation without PoE 73 W (250 BTU/hr)
Power consumption without PoE 73 W (250 BTU/hr)
Table 87: Summit X450e Series Switch Technical Specifications (Continued)