IN1608 xi Scaling Presentation Switcher • Internal Web Pages 108
4. In the Hold Time field (see figure 67,
6
on page 105), adjust the value by one of the
following methods:
• Enter a value in the Hold Time field and press the <Enter> or <Tab> key.
• Click the Up or Down arrow buttons. The default value is 1000 ms.
5. In the Release Time field (
7
), adjust the value by one of the following methods:
• Enter a value in the Release Time field and press the <Enter> or <Tab> key.
• Click the Up or Down arrow buttons.
6. In the list of Duck (target) checkboxes (
8
), select the targets to attenuate when the
threshold is met. Only selected inputs are ducked.
NOTE: Only one mic input can be selected as a duck target at a time.
7. For those targets checked in step 6, adjust the adjacent Duck By field (
9
) in one of the
following methods:
• Enter a value in the Duck By field and press the <Enter> or <Tab> key.
• Click the Up or Down arrow buttons. The default is 20 dB. If additional attenuation of
a target is required, increase this value.
Audio mix configuration
After the audio inputs have been properly configured, select the Mix Controls tab (see
figure 68,
1
) to mix microphone levels, create a mix of the microphone and program
volume, and set bass and treble settings.
Figure 68. Mix Controls Tab
To Next Page
Loading...