IN1608 xi Scaling Presentation Switcher • Internal Web Pages 109
Mic mix levels
Mic mix levels adjust the individual mic levels to create a proper blend (mix) of the two
microphones. Adjust the Mic 1 or Mic 2 fader to adjust the desired mic/line level.
To adjust the mic mix levels:
1. Click the Mix Controls tab (see figure 68
1
, on the previous page).
2. Adjust the level using any of the following methods (
2
):
• Click and drag the fader handle to the desired level.
• Click in the level text field below the fader and enter a new value. Then, press the
<Enter> or <Tab> key to apply the change.
• Click the Up or Down arrow button to the right of the level text field to respectively
increase or decrease the level in 0.1 dB increments.
3. To mute the mic/line gain, click the Mute button (
3
) below the corresponding Mic
fader.
Mic volume
Mic volume adjusts the listening level of the mic mix (the blend
of the individual microphones) while maintaining the relative
individual levels (see “Mic mix levels”). The Mic Volume fader
has a range of -100 dB to 0 dB. It also includes soft limit
handles (see
1
in the illustration at right) to adjust the
minimum and maximum allowable range.
To adjust the mic volume:
1. Click the Mix Controls tab (
1
).
2. Adjust the level using any of the following methods (
4
):
• Click and drag the fader handle to the desired level.
• Click in the level text field below the fader and enter a new value. Then, press the
<Enter> or <Tab> key to apply the change.
• Click the Up or Down arrow button to the right of the level text field to respectively
increase or decrease the level in 0.1 dB increments.
3. If desired for the Mic Volume fader, click and drag the minimum and maximum soft
limits to define new minimum and maximum values within the original range.
4. To mute the microphone inputs, click the Mute button (
5
) below the Mic Volume fader.
Program volume
Program volume adjusts the listening level of the program source, independent of the mic
volume. The Program Volume fader has a range of -100 dB to 0 dB. It also includes soft
limit handles to adjust the minimum and maximum allowable range.
NOTE: Listening to the audio throughout the process of setting the program volume
may be required for setting a nominal output level.
To Next Page
Loading...