IN1608 xi Scaling Presentation Switcher • Internal Web Pages 114
3. In the Mix Options panel (see figures 71 and 72,
2
, on page 112), click the desired
radio button. The amplifier models have different options based on the type of amplified
audio output connector.
• For stereo models, the mix options include the following:
• Stereo Program — Outputs program audio as left and right stereo.
• Dual Mono Program — Sums left and right program audio and outputs it on
each channel.
• No Program — Mutes program audio.
• For mono models, the mix options include the following:
• L + R Program (Mono) — Sums left and right program audio on the output.
• No Program — Mutes program audio.
For analog outputs 1 and 2:
1. Click the Output tab (see figure 65,
4
on page 102).
2. If desired, deselect the Mic/Line checkbox in the Mix Options panel (see figure 72,
2
, on page 112) to not include the mic/line inputs in the amplified output (this is
selected by default).
3. In each Mix Options panel (
2
), click the desired radio button. The two outputs can be
mixed together (see the table below).
Output 1 Output 2 Result
Left Program Right Program
Output 1 and 2 act as a stereo pair (default).
L+R Program L+R Program
L and R program audio are summed on each
output. They act as unique, independent
outputs with or without mic.
No Program No Program
No program audio. Output 1 and 2 are treated
as unique, independent outputs with or without
mic.
For the variable analog output:
1. Click the Output tab (see figure 65,
4
).
2. If desired, deselect the Mic/Line checkbox in the Mix Options panel (see figure 73,
2
, on page 112) to not include the mic/line inputs in the amplified output (this is
selected by default).
3. In the Mix Options panel (
2
), click the desired radio button:
• Stereo Program — Outputs program audio as left and right stereo.
• Dual Mono Program — Sums left and right program audio and outputs it on each
channel.
• No Program — Mutes program audio.
To Next Page
Loading...