Extron electronics IN1608 xi IPCP SA with LinkLicense - Page 74

IN1608 xi Scaling Presentation Switcher • SIS Configuration and Control 66
Command ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Audio Configuration Commands, continued
Group Volume
Set volume
E
D
X4^
*
X4&
GRPM
}
GrpmD
X4^
*
X4&]
Set the volume to a value of
X4&
.
Raise volume
E
D
X4^
*
X5!
+GRPM
}
GrpmD
X4^
*
X4&]
Increase the volume by
X5!
dB.
Lower volume
E
D
X4^
*
X5!
-GRPM
}
GrpmD
X4^
*
X4&]
Decrease the volume by
X5!
dB.
View volume level
E
D
X4^
GRPM
} X4&]
In verbose modes 2 and 3:
GrpmD
X4^
*
X4&]
View the volume level.
Group Mute
Group mute
E
D
X4*
*1GRPM
}
GrpmD
X4*
*1
]
Mute group
X4*
.
Group unmute
E
D
X4*
*0GRPM
}
GrpmD
X4*
*0
]
Unmute group
X4*
.
View group mute status
E
D
X4*
GRPM
} X(]
In verbose modes 2 and 3:
GrpmD
X4*
*
X(]
View the group mute on or off
status.
Group Bass and Treble
Set bass or treble level
E
D
X4(
*
X5)
GRPM
}
GrpmD
X4(
*
X5)]
Set the bass or treble to a value of
X5)
.
Raise bass or treble
E
D
X4(
*
X5!
+GRPM
}
GrpmD
X4(
*
X5)]
Increase the bass or treble level by
X5!
dB.
Lower bass or treble
E
D
X4(
*
X5!
-GRPM
}
GrpmD
X4(
*
X5)]
Decrease the bass or treble level by
X5!
dB.
View bass or treble level
E
D
X4(
GRPM
} X5)]
In verbose modes 2 and 3:
GrpmD
X4(
*
X5)]
NOTES:
X(
= Enabled or disabled
0 = off or disabled, 1 = on or enabled
X4^
= Volume group number
1 = program volume, 3 = mic volume, 8 = variable volume
X4&
= Group volume level
-1000 to 0, where -1000 = -100 dB or 0% volume and
0 = 0 dB or 100% volume
X4*
= Mute group number
2 = program mute, 4 = mic mute, 7 = output mute
X4(
= Bass and treble group number
5 = bass control, 6 = treble control
X5)
= Group bass and treble level
-240 to +120, where -240 = -24 dB and 120 = 12 dB
X5!
= Increment value
dB value multiplied by ten, in 0.1 dB increments, to raise or lower a
group fader (for example, 100 = 10 dB)