Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual

IN1608 xi Scaling Presentation Switcher • SIS Configuration and Control 67
Command ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Preset Commands
Presets
Setting User Preset Input Preset Setting User Preset Input Preset
Horizontal and vertical start Saved Film detect Saved
Active lines Saved Brightness and contrast Saved Saved
Pixel phase Saved Color and tint Saved Saved
Active and total pixels Saved Detail Saved Saved
Input type Saved Size and position Saved Saved
Audio gain and attenuation Saved Preset name Saved Saved
Recall user preset
1*
X2!
. 1Rpr
X2!]
Recall user preset
X2!
.
Save user preset
1*
X2!
, 1Spr
X2!]
Save the current picture controls.
Delete user preset
E
X1*
X2!
PRST
}
PrstX1*
X2!]
Clear user preset
X2!
.
Recall input preset
2*
X2@
. 2Rpr
X2@]
Recall input preset
X2@
.
Save input preset
2*
X2@
, 2Spr
X2@]
See the table above for settings.
Delete input preset
E
X2*
X2@
PRST
}
PrstX2*
X2@]
Clear input preset
X2@
.
Preset Names
NOTE: To clear a preset name, enter a single space character for
X1$
. This resets the preset name to the default value:
“User Preset nn” for user presets or “Input Preset nnn” for input presets. This is valid only for existing presets.
Write user preset name
E
1*
X2!
,
X1$
PNAM
}
Pnam1*
X2!
,
X1$]
Set user preset
X2!
name to
X1$
.
View user preset name
E
1*
X2!
PNAM
} X1$]
In verbose modes 2 and 3:
Pnam1
X2!
,
X1$]
View the name of user preset
X2!
.
Write input preset name
E
2*
X2@
,
X1$
PNAM
}
Pnam2*
X2@
,
X1$]
Set input preset
X2@
name to
X1$
.
View input preset name
E
2*
X2@
PNAM
} X1$]
In verbose modes 2 and 3:
Pnam2
X2@
,
X1$]
View the name of input preset
X2@
.
Auto Memories (per input)
Enable
EX!
*1AMEM
}
Amem
X!
*1
]
Enable Auto Memory on input
X!
.
Default is enabled.
Disable
EX!
*0AMEM
}
Amem
X!
*0
]
Disable Auto Memory on input
X!
.
View
EX!
AMEM
} X(]
In verbose modes 2 and 3:
Amem
X!
*
X(]
View the status on input
X!
.
NOTES:
X!
= Input selection
1-8
X(
= Enabled or disabled
0 = off or disabled, 1 = on or enabled
X1$
= Text label
Up to 16 characters
X2!
= User presets
1-16
X2@
= Input presets
1-128

Extron electronics IN1608 xi IPCP SA with LinkLicense Specifications

General

Brand	Extron electronics
Model	IN1608 xi IPCP SA with LinkLicense
Category	Media Converter
Language	English