Fanvil F52 - Page 51

Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
- 51 -
primary server is unavailable)
Backup Server Port
Backup SIP Server Port
Server Name Name of SIP Backup server
Codecs Settings
Click on the desired codec to select it. Then use the vol-/vol+ keys to move to the Enabled or
Disabled List. Use the Up/Down arrow to change the priority of enabled codecs.
Advanced SIP Settings
Forward Type
There are 3 call forwarding modes plus Disabled.
Disabled：No call forwarding – Default mode
Busy：If the phone is busy, incoming calls will be forwarded.
No answer：
If there is no answer, incoming calls will be forwarded
after a specified time.
Always
：
All incoming calls will be forwarded.
Forward Number Number to which calls are to be forwarded.
No Ans. Fwd Wait Time Used in conjunction with Call Forward No Answer. Wait time in
seconds before call is forwarded.
Transfer Timeout
Time interval between sending “bye” message and hanging up
after the phone transfers a call.
Enable Hotline Activate Hot Line feature. Automatically call a number by going
off hook.
Hotline Number Number to be called in Hot Line Mode.
Warm Line Wait Time Used in Hot Line Mode. Time the phone waits after off hook
before dialing the hot line number.
SIP Encryption Enable/Disable SIP Encryption.
SIP Encryption Key SIP Encryption key.
RTP Encryption Enable/Disable RTP Encryption.
RTP Encryption Key RTP encryption key
Enable Auto Answer Activate Auto Answer mode. If activated, phone will
automatically answer an incoming call.
Auto Answer Timeout Used in conjunction with Auto Answer. The phone will answer
an incoming call after the Auto Answer Timeout
Enable Session Timer
If enabled, this will refresh the SIP session timer per RFC4028.
Session Timeout
Refresh interval if Session Timer is enabled.
Subscribe For MWI
If enabled, the phone will send Message Waiting Indication
(MWI) Subscribe message to the SIP Server
MWI Number
Specify the number to call to retrieve Voice Messages.