Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
Time interval between MWI Subscribe Messages.
Choose Conference Type, either local or network
Conference Number Number to dial to access network conference server. Not needed
if Local conference mode is chosen
SIP re-registration time. Default is 3600 seconds. If the server
requests a different time, the phone will change to that value.
Enable Service Code Enables or disables the services described below. These codes
will be sent to the SIP server to activate or deactivate the service.
DND On Code Do Not Disturb (DND) – When this hot key is pressed, all calls to
the extension to be rejected by the server. The incoming call
record will not be displayed in the Call History.
DND Off Code Disable Server DND as described above.
Always Call Forward On – When this function is enabled, the
server will forward all calls to a designated number. The
incoming call record will not be displayed in the Call History.
Disable Server Always CFwd as described above.
Busy Call Forward On - When this function is enabled, the server
will forward all calls to a designated number if the telephone is
busy. The call record will not be displayed in Call History.
Busy CFwd Off Code Disable Server Busy CFwd as described above.
No Ans. CFwd On Code No Answer Call Forward On - When this function is enabled, the
server will forward all calls to a designated number if there is no
answer within a designated time. The incoming call record will not
be displayed in the Call History.
No Ans. CFwd Off Code Disable Server No Ans. CFwd as described above.
Ban Anonymous On
Code
Ban Anonymous On – When this function is enabled, the server
will disallow the phone to make anonymous calls.
Ban Anonymous Off
Allow Anonymous Calling function described above. In other
words “Anonymous” will be transmitted for Caller ID.
Specifies the NAT keep alive type. If SIP Option is selected, the
phone will send SIP Option sip messages to the server every NAT
Keep Alive Period. The server will then respond with 200 OK.
If UDP is selected, the phone will send a UDP message to the
server every NAT Keep Alive Period.
Keep Alive Interval Set the NAT Keep Alive Interval. Default is 60 seconds
User Agent Set SIP User Agent value.
DTMF SIP INFO Mode You can chose Send 10/11 or Send */#
To Next Page
Loading...
