Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
If enabled, allows intercom calls.
If enabled, plays intercom ring tone to alert to an intercom call.
P2P IP Prefix Set Prefix for peer to peer IP call. For example: You wish to dial
192.168.1.119. If the P2P IP Prefix is defined as 192.168.1., it is
only necessary to dial #119. The default is “.”. If this box is left
blank, IP dialing is disabled.
Disables Power Light if selected.
The phone will dial the emergency call number even if the keyboard
is locked. And multi numbers can be added by “,”, such as 911,999
When a number is entered beginning with the password prefix, the
following N numbers after the password prefix will be displayed as
*. N is the value entered in the Password Length field.
For example: If the password prefix is 3 and the Password Length is
2, then dialing the number 34567 will display 3**67 on the phone.
Password Dial Prefix Prefix for password dialing as described above.
Password Dial Length Length for password dialing as described above.
Enable Call History Allow phone to save missed call/dialed call/incoming call or not.
Enable Default Line If enabled, you can assigned default SIP line for dialing out, not
SIP1.
Alllow IP Call Allow IP direct call, or disable IP call for dialing.
Play Talking DTMF
Tone
Allow DTMF voice played during talking, or only send DTMF
without local play.
Ban Outgoing If enabled, no outgoing calls can be made.
Enable Call Waiting If enabled, notifies user of a second call during a call. Caller ID of
the new caller will be displayed. Press HOLD button to place
existing call on hold and answer new call. Press HOLD again to
return to first call.
Enable 3-way
If enabled, allows 3-way conference.
If enabled, the phone will accept a call even if the called number
does not belong to the phone.
Enable Call
Completion
This is similar to Auto Redial except that the phone detects the state
of the called number before making a new call attempt.
Enable Pre-Dial If this feature is enabled, digits dialed on-hook will be transmitted
when the phone goes off-hook.
If enabled, the phone will not ring to indicate a new call. Instead,
the light below the key pad will blink to indicate a new call.
To Next Page
Loading...
