Fanvil F52 - Page 64

Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
- 64 -
Hide DTMF
This feature sets how DTMF digits are displayed after a call is in
progress. For example, dialing a PIN code to access banking
information. There are 4 choices.
13. Disabled – All the digits will be shown on the LCD.
14. All – None of the digits will be shown on the LCD. The “*”
will be shown.
15. Delay – The last digit entered will be shown for a short time and
then replaced by “*.”
16. Last Show – The last digit entered will be shown. Previous
digits are replaced by “*.”
Enable Intercom Mute
If enabled, mutes incoming calls during an intercom call
Enable Intercom Barge If enabled, the phone will auto-answer an intercom call during an
outside call. If an intercom call is established, a second intercom
call will be rejected.
DND Return Code Specify SIP Code returned for DND. Default is 480 - Temporarily
Not Available.
Busy Return Code Specify SIP Code returned for Busy. Default is 486 – Busy Here.
Reject Return Code Specify SIP Code returned for Rejected call. Default is 603 –
Decline.
Active URI Limit IP
IP address of the server for the Action URL messages described
below.
Push XML Server
IP address for XML server which can send display content to the
phone.
Enable Call Waiting
Tone
Enables audible notification of call waiting.
Enable Multi Line
Enable phone to make calls for 10 lines max, or disable for 2 lines
max.
Enable Auto Switch
Line
Enable phone to select an available SIP line as default automatically.
Play Dialing DTMF
Tone
Enable dialing DTMF tone played, or disable for dialing DTMF tone
played.
Action URL Settings URL for various actions performed by the phone. These actions
are recorded and sent as xml files to the server. Sample format is
http://InternalServer /FileName.xml
Block Out Settings Add or Delete Blocked numbers – Enter the prefix of numbers
which should not be dialed by the phone. For example, if 001 is