Contents and general safety instructions
XI
Festo P.BE-CPX-PNIO-EN en 1407c English
This description includes information about installation and
configuration of the bus node for PROFINET as well as
PROFINET-specific information regarding parameterisation,
commissioning, programming and diagnostics of a CPX ter-
minal in a PR O FINET network.
Further information about PROFINET can be obtained in the
Internet:
www.profinet.com
Observe in parti cular the following data:
– PROFINET installation guidelines
(“PROFI N ET Installation Guide”,
“Installation Guideline PROFINET Part 2…”).
General, basic information on PROFINET can be found in the
following document:
– “PROFINET System Description
Technology and Application”.
General basic information about the mode of operation, as-
sembly, installation and commissioning of CPX terminals can
be found in the CPX system description (P.BE-CPX-SYS...).
Information about additional CPX modules can be found in
the description for the respective module.
An overview of the structure of the CPX terminal User Docu-
mentation can be found in the CPX system description
(P.BE-CPX-SYS...).
Product-specific information about the control system (I PC,
PLC or I/O controller) can be found in the manufacturer’s
product documentation accompanying the product.
To Next Page
Loading...
