Festo CPX-FB33 - Additional Function Prioritized Start-Up (Fast Start-Up

B. Glossary
B-5
Festo P.BE-CPX-PNIO-EN en 1407c English
B.1.3 Additional function “Prioritized St art-up” (“Fast St art-up ”)
The Remo te I/O operating mode can be combined with the
additi onal functio n Prioritized Start-up .
This additional function ensures a faster running up of the
CPX terminal, also designated as “Fast Start- up”, (FSU) or
“Fast restart”.
The subsequent sections summarise the specific information
from the previous chapters to pro vide a comprehensive over-
view of this addi tional functio n.
The summary also simplifies conversion of an existing CPX
system to “Fast Start-up”.
Requirements The additional function “Fast Start-up” requires cer tain hard-
ware, firmware and software versions as well as the current
GSDML file, which must be installed as part of commission-
ing.
– Observe the wiring notes regarding FSU in section 1.6.2.
– Hardware, firmware and software requirements can be
found in Tab. 2/10 (in section 2.5.2).
– Tab. 2/10 also includes information about the required
GSDML file: For “Fast S tart-up ”, you need at least
Version 2.2.
– Installation of the GSDML file is described in section 2.5.5.