14
CONNECT NAV+
STEERING WHEEL CONTROLS
The main functions of the CONNECT Nav+ are repeated on the steering wheel, which facilitates control. As shown in fig. 2,
there are 8 buttons and one encoder. Turning on the function chosen is in some cases controlled by the push duration (short
or long), as shown in the following table:
fig. 2
F0L0749m
Legend
&
SRC
+/-
ô
▲/▼
ß
Short push function
(less than 2 seconds)
Activate/deactivate the MUTE for radio sources.
Select operating mode FM1 / 2 / 3 / AST-MW / LW /
AMAST - CD - CDC.
Increase or decrease listening volume.
Activate or interrupt voice recognition option.
The SCAN keys are used: in Radio mode: to search for the
next or previous available radio station; in CD/MP3/CDC mode:
skip to previous or next track.
- Send phone call.
- Redial last number called and send call if key pressed within
5 seconds.
- Accept incoming phone call.
Long push function
(more than 2 seconds)
–
–
Increase or decrease listening volume continuously.
Activation of voice memo option.
This may be turned off by an additional short or long press on the key.
_
- Reject incoming phone call.
- Stop dialling a new phone number.
- Interrupt a current call.
To Next Page
Loading...
