38
CONNECT NAV+
If the CD is not inserted, is illegible
or is not an audio CD, the display will
show the message “No CD” or “No
CD-DA” and all CD/CDC icon keys
are disabled.
Press respectively “
¯¯
” 5-fig. 1 or
“
˙˙
” 6-fig. 1 to play the previous or
the next track on the CD.
To stop playing a CD, long press on
key “
˙/II” 9-fig. 1. To pause a CD,
short press on button “˙/II” 9-fig. 1.
To resume playing a CD, repeat the
short press on key “˙/II” 9-fig. 1.
To eject the CD from the slot 7-
fig. 1 press key 8-fig. 1.
“Shuffle” FUNCTION
(RANDOM PLAYING)
To turn the “Shuffle” function on/off,
select it by turning the knob 15-
fig. 1 and then press it to confirm.
When the Shuffle function is on, the
display shows “SHUFFLE” and symbol
“✓” is shown near the corresponding
icon.
With this function on, the CD
tracks are played in random se-
quence. To turn off this function,
press knob 15-fig. 1 again.
“Prog” FUNCTION
To turn the “Prog” function on/off, ro-
tate knob 15-fig. 1 and then press it af-
ter selecting the function. This function
can only be selected with CD or CDC
at STOP.
To Next Page
Loading...
