145
CONNECT NAV+
INFOMOBILITY SERVICES
Press button
•
13-fig. 1 to display
screen fig. 153 to be used for re-
questing services and info. Available
functions are:
– System
– Select.
bConnect operator availability
(GSM field strength, etc...) is shown on
the left top of the screen, whereas
SMS sent to the bCONNECT oper-
ator are listed at the bottom of the
screen.
Services are available only upon sub-
scription. If the user hasn’t subscribed
yet or if bCONNECT subscription
expired, then the “Connect” icon is
disabled and screen in fig. 154 is dis-
played showing “Subscribed services
not enabled”.
User can call the bCONNECT op-
erator to get information to (re)acti-
vate the service.
If bCONNECT subscription ex-
pired, it is always possible to consult
stored information.
“System” function
Select this function through knob
15- fig. 1 and press it to confirm: the
on-board device will send info request
to the bCONNECT Operational
Centre via a pre-configured SMS.
When receiving the request, bCON-
NECT will call the user on the car
freehand set. When this phone con-
nection is active the user can request
info to the operator. If the telematic
connection cannot be activated, the
display will show the relevant warning
message. Some information will be giv-
en only vocally by the operator, while
others may also be sent with SMS
messages, that will be received re-
gardless of the function active (MAIN,
AUDIO, etc.). The message will be
shown directly on the screen active at
that moment, in a window fig. 155
containing the “Save”, “Delete”, “Map”
(if the message contains geographical
indications) and “Call” (if a telephone
number is present).
Choosing “Save” option the message
will be stored, while “Delete” will
clear it from the screen and from
memory.
To Next Page
Loading...
