Fiat Connect Nav+ - VEHICLE SETTINGS

151
CONNECT NAV+
To set a new Date/Time (only with
ignition key at ON), select the “Date
& time” icon and then press the knob
15-fig. 1.
To set day, month, year, hours, min-
utes, mode (12h /24h), rotate the
knob 15-fig. 1 to the required setting
and then press the knob 15-fig. 1,
each field will be activated in sequence.
Setting “GG”: select day rotating
the knob 15-fig. 1 and press it to con-
firm.
Setting “MMM”: select month rotat-
ing the knob 15-fig. 1 and press it to
confirm.
Setting AAAA: select year rotating
the knob 15-fig. 1 and press it to con-
firm.
Setting HH: select hour rotating the
knob 15-fig. 1 and press it to confirm.
Setting MM: select minutes rotating
the knob 15-fig. 1 and press it to con-
firm.
Setting MODO (12h / 24h): select
12h or 24h mode rotating the knob
15-fig. 1 and press it to confirm.
To activate the required settings, se-
lect and confirm “OK” by turning and
pressing the knob 15-fig. 1.
IMPORTANT During setting,
hours (HH) are always displayed with
24h mode, regardless of set mode.
IMPORTANT If set mode is 24h,
the display shows time using digits be-
tween 0 and 23; if set mode is 12h, the
display shows time using digits be-
tween 1 and 12.