Page 142 Operator‘s Manual FERITSCOPE
®
FMP30
Instrument Settings - Service Function Menu
10 Instrument Settings - Service Function Menu
The instrument settings described below are configured from the Service
function menu.
How to access the “Service function” menu:
How to exit the “Service functions” menu:
The default settings of the service function parameters (i.e., the as shipped
factory settings) are underlined below(e.g.,: [Histogram off]. A re-initializa-
tion will reset the settings in the service functions to the default settings
( Page 152). However, time, date and language are not reset by the re-
initialization!
Key sequ. /
Action
Detail of the display Explanation
ON/OFF
5 x ENTER
Use ON/OFF to turn the instrument on
After pressing ENTER 5 times, the identifi-
cation number 157 appears on the display.
2 x
Enter the identification number 159 by
pressing the arrow key
2 times.
Use ENTER to confirm the setting.
ENTER The Service settings menu will be dis-
played.
Press the arrow keys
or to select the
desired service function.
Key sequ. /
Action
Explanation
DEL Press the DEL key to exit the Service func-
tions menu.
The instrument is ready to make measure-
ments.
To Next Page
Loading...