Fisher FERITSCOPE FMP30 - Usb

Page 156 Operator‘s Manual FERITSCOPE
®
FMP30
Instrument Settings - Service Function Menu
10.4 USB
10.4.1 Output
Key sequ. /
Action
Detail of the display Explanation
Select USB from the service menu.
Instrument with Bluetooth module: Select
USB/Bluetooth.
Instrument with COM module: Select USB/
COM.
Use ENTER to confirm the selection.
ENTER Select the desired output mode by pressing
the arrow keys
 or  and confirm the se-
lection with ENTER.
[Single meas.]: Single reading output via
the interface port.
[Block mean value]: Block mean value
output via the interface port.
Use DEL at any time to cancel the setting
procedure.