Operator‘s Manual FERITSCOPE
®
FMP30 Page i
Table of Contents
1 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Symbols and Conventions Used in the Manual . . . . . . . . . . 1
1.2 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Requirements on the Operating Personnel . . . . . . . . . . . . . 2
1.4 Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.5 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.6 Probe Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.7 Handling, Storage and Transport of the Base and the
Calibration Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.8 Instrument Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.9 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.10 Limitation of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.11 CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Description of the Instrument . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Control Panel Key Functions . . . . . . . . . . . . . . . . . . . . . . 10
2.3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.4 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.5 Contents of Shipment and Options . . . . . . . . . . . . . . . . . . 19
3 System Setup, Maintenance and Cleaning . . . . . . . . 21
3.1 Voltage supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.2 Connecting Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.3 Instrument: On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.4 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
4 Probe Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4.1 Handling During Measurements . . . . . . . . . . . . . . . . . . . . 34
4.2 Assigning a New Probe . . . . . . . . . . . . . . . . . . . . . . . . . 35