Page 164 Operator‘s Manual FERITSCOPE
®
FMP30
Instrument Settings - Service Function Menu
10.5.5 Histogram
A histogram can be added to the printout of the final result if at least 30
readings are stored in the Application ( 8.2.3 ‘Histogram’, beginning on
Page 129).
Key sequ. /
Action
Detail of the display Explanation
Select Print from the service menu.
Use ENTER to confirm the selection.
ENTER Select Histogram by pressing the arrow
keys
or and confirm the selection with
ENTER.
Select the desired histogram mode by press-
ing the arrow keys
or and confirm the
selection with ENTER.
[off]: Histogram printout is not enabled
[on]: A histogram presentation is printed
following the printout of the final result.
Use DEL at any time to cancel the setting
procedure.
To Next Page
Loading...