Fisher FERITSCOPE FMP30 - Group Separator

Operator‘s Manual FERITSCOPE
®
FMP30 Page 157
Instrument Settings - Service Function Menu
10.4.2 Group Separator
Key sequ. /
Action
Detail of the display Explanation
Select USB from the service menu.
Instrument with Bluetooth module: Select
USB/Bluetooth.
Instrument with COM module: Select USB/
COM.
Use ENTER to confirm the selection.
ENTER
Select the desired groups separator mode
by pressing the arrow keys
 or  and con-
firm the selection with ENTER.
[off]: No group separator will be transmit-
ted between the individual blocks during
the output via the interface port.
[on]: A group separator (ASCII29) will be
transmitted between the individual blocks
during the output via the interface port.
Use DEL at any time to cancel the setting
procedure.