Fisher FERITSCOPE FMP30 - Page 163

Page 158 Operator‘s Manual FERITSCOPE
®
FMP30
Instrument Settings - Service Function Menu
10.4.3 Send Free-Running Mode
10.4.4 COM Module - Data Transfer Settings
Key sequ. /
Action
Detail of the display Explanation
Select USB from the service menu.
Instrument with Bluetooth module: Select
USB/Bluetooth.
Instrument with COM module: Select USB/
COM.
Use ENTER to confirm the selection.
ENTER
Select the desired free-running mode by
pressing the arrow keys
 or  and con-
firm the selection with ENTER.
[off]: Measurement data that have been
taken using the “free-running” display mode
will not be transmitted via the interface port.
[on]: Measurement data that have been
taken using the “free-running” display mode
will be transmitted via the interface port.
Use DEL at any time to cancel the setting
procedure.
Key sequ./
Action
Detail of the
display
Explanation
Select USB/COM from the service menu.
Use ENTER to confirm the selection.
USB/COM