Operator‘s Manual FERITSCOPE
®
FMP30 Page 173
Instrument Settings - Service Function Menu
10.7 Measurement
10.7.1 Audible Signal
The audible signal, i.e., the measurement acquisition signal that sounds af-
ter every measurement can be disabled.
The audible signals that sound after instrument power-up, after a toler-
ance limit violation, after recognition of an outlier measurement or
after concluding a block (when making measurements with automatic
block creation) cannot be disabled! (Details about the audible sig-
nals: 7.3.4 ‘Audible Signals After the Measurement Acquisition’,
beginning on Page 90).
Key sequ. /
Action
Detail of the display Explanation
Select Measurement by pressing the arrow
key
or and confirm the selection with
ENTER.
ENTER Select Audible signal by pressing the ar-
row keys
or and confirm the selection
with ENTER.
ENTER
Select the desired mode by pressing the ar-
row keys
or and confirm the selection
with ENTER.
[off]: No audible signal sounds when the
probe is placed on the specimen.
[on]: An audible signal sounds when the
probe is placed on the specimen.
Use DEL at any time to cancel the setting
procedure.
To Next Page
Loading...