Operator‘s Manual FERITSCOPE
®
FMP30 Page 149
Instrument Settings - Service Function Menu
10.2.6 Light
The following options are available for the light setting”
“off after n sec”: The light turns off after n seconds.
“always off”: The light is always off.
“always on”: The light is always turned on.
“on w. power unit”: The light is on only with the power unit connected.
Key sequ. /
Action
Detail of the display Explanation
Select System from the service menu.
Use ENTER to confirm the selection.
ENTER
Select Light by pressing the arrow keys
or
and confirm the selection with EN-
TER.
ENTER Select the desired setting by pressing the ar-
row keys
or .
Use ENTER to confirm the desired setting.
Use DEL at any time to cancel the setting
procedure.
or
ENTER
off after n sec
Use ENTER to confirm the value, or:
specify a new value by pressing the arrow
keys
or .
Pressing ENTER returns you to the menu in
order to enter additional settings.
or
ENTER
always off
After confirming the selection “always off”
with ENTER you are immediately returned
to the menu in order to enter additional set-
tings.
To Next Page
Loading...