Fisher FERITSCOPE FMP30 - Matrix Mode

Operator‘s Manual FERITSCOPE
®
FMP30 Page 169
Instrument Settings - Service Function Menu
10.6.3 Matrix Mode
Key sequ. /
Action
Detail of the display Explanation
Select Device Mode by pressing the arrow
keys
 or  and confirm the selection with
ENTER.
ENTER Select the Matrix mode by pressing the ar-
row keys
 or  and confirm the selection
with ENTER.
ENTER This settings option appears only when “du-
al method” both is set for all Applications
set up with dual probes ( Page 184).
Select the desired mode by pressing the ar-
row keys
 or  and confirm the selection
with ENTER.
[off]: matrix mode is disabled, i.e., the
standard measuring mode is enabled
[on]: Matrix measuring mode is enabled
[10/20/150]: Example for 10 Applica-
tions each with 20 blocks of 150 measure-
ments each.
Use DEL at any time to cancel the setting
procedure.